Choosing the Right UPVC Door Handle Replacement

Replacing your door handles made of upvc is an easy task but picking the right handle can be tricky. The majority of modern double-glazed handles include spring cassettes within them, however older models don't have.

If the handle of your upvc is loose and floppy there may be an issue with the internal parts of the multipoint lock. This article will discuss a number of potential problems & their causes.

Sagging or drooping handles

UPVC handles are susceptible to wear and tear. This is especially true in older properties. The most frequent reason handles become floppy is due to a damaged spring cassette inside the door lever. This is caused by a lot of force and the square spindle that holds the cassette may be moved or round.

The good news is that a uPVC door handle replacement is an easy task and can be done in a matter of minutes. The first step is to take off the handle unit that was previously used. To remove it, you must unscrew the fixing screws that are visible on the backside of the handle lever. After the handles have been removed, you can remove the cassette from the square spindle and replace with the new one.

On the internet, you can select from a variety of uPVC handles that come with different finishes. The finish you choose will determine the life span of your handle as well as how easy it will be to clean. Finishes like Resista, Stainless Steel, or PVD are designed to resist corrosion and last up to 25 years.

After you have chosen the colour or style you can then choose the type of handle you require. The most commonly used types are lever and pad arrangement. Lever pads are typically used to stop access from unauthorised people. They are equipped with both a lever inside and a paddle on the outside.

Next, measure and note the dimensions of the handle you have. You'll need to know the PZ dimension (the distance from the screw hole to the middle of the lever), the length of the handle and the dimensions of the keyhole. Once you have these measurements, you can then compare these to the handle size matrix to find the correct replacement.

Broken springs

Over time, handles made of uPVC can become loose or wobbly. The spring cassette might also break. These springs are used to make sure that the lever of the handle is in a horizontal position. Without them your doors will not lock properly.

Modern uPVC handles are constructed with these cassettes directly built into the backplate. These springs are typically built into older uPVC door mechanisms. This isn't something you can fix by yourself, but it's worthwhile to have your locksmith examine the issue as it could be the reason for the sagging uPVC handles.

The most common issue that is encountered with uPVC handles is that they become loose over time. This is usually caused by worn-out springs, which are easy to repair. The majority of the time the reason for this is excessive use of the handle and as a result of that, the square spindle within the handle will wear away and the springs will move out of place.

To fix this issue, open the door and unscrew the fixing screws on the back of the handle plate. This can be done by using a Philips screwdriver and once the screws are removed the handle can be removed and the plates pulled apart carefully. The springs that were used before can be removed and replaced with new springs.

Depending on the type of handle you are using the distance between the two fixing screws can vary and this is crucial to know prior to purchasing a replacement. This measurement is known as the PZ and it is important to make use of a calibrated measuring tape in order to get an exact reading.

After reinstalling the springs, you should be able to use the handle without any issues. But, it's important to grease the mechanism inside to ensure that everything functions just as it should. This will not just ensure that your uPVC doors are as secure as possible but also make them more comfortable to use for a long time.

Handles that slide around

Handles that move around can be caused by a number different reasons. One of the most common causes is when the handle levers aren't aligned properly with lock. This is a problem that can occur on uPVC doors and composite doors. However, it is more evident on older doors since they are made of less durable materials that aren't able to stand up to the elements.

A professional can solve this problem by realigning the handles so that they are in line with the lock. They'll also examine the lock to see if there is anything that requires fixing. In many instances, a minor adjustment to the handle springs is all that's needed to fix this issue.

The replacement of your uPVC door handle is easy enough, but you need to take the measurements of the handles you have in place to ensure that you have the right size replacement. You'll need to take measurements of the distance between the two fixing screws as well as the size of the lever and key-hole position. You can then use this uPVC handle size guide to determine the correct replacement for your home.

After you've taken the measurements, take off the old upvc replacement door handles handle. It's usually a simple process and only requires a screwdriver. Once the screws have been removed, you'll have to unscrew the handle and then put in the new one.

It is essential to secure the door with a wedge prior to starting. This will prevent it from closing during the course of your work. After you remove the handle, you will be able to inspect the components underneath the bifold door handles that cause the door to slide.

If you don't have time or nerves to tackle this job yourself, an expert handyman from Fantastic Services can help. They will use special locks to unlock the bi-fold doors handle without damaging the door. Then they will replace the damaged handle and ensure that everything works as it should.

Gearbox damage

A damaged gearbox may cause the handle made of upvc to become stiff and lose its function. This can also prevent the lock from being able to be opened with the use of a key. This is extremely dangerous and should be dealt with as soon as possible. If you are unable resolve the issue yourself it is essential to call a locksmith since they have the experience and tools to complete the task properly.

The first step is to take the handle from its cover plate. You can do this using the help of a screwdriver with an angled tip. After you have removed the handle, take out the middle screw which holds the barrel. After you have removed the middle screw, you will then loosen the two screws that hold the barrel. Then you can pull the barrel out of the door. You'll need to open the door to do this, so make sure that you have someone to assist you.

After you have removed the cylinder from the handle, you can replace it with a fresh one. Make sure the new cylinder is the same dimensions as the old aluminium window handles one. In the event that it isn't, you could end up with an unaligned handle correctly. This can lead to a myriad of issues, such as leaks and draughts.

Most door handles made of upvc feature slots for adjustment. These slots can be used to tighten or loosen the handle. They are typically located on the inside of the door near where the handle joins the cylinder. Allen wrenches can be used to tighten the slots of adjustment. Once you have made the adjustments, you can put the handle back on and screw it back into. After that, you can test the handle to make sure that it is working properly.

If the upvc door handle becomes loose or floppy when closed, it's usually an indication that the gearbox in the upvc has been damaged or the internal spring components are in the process of breaking down. This can cause the upvc multipoint lock to fail and leave your door open to intruders. If this happens, it will be necessary to replace the upvc gearbox. The cost will range from PS145 - PS280, including labour.