Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. They do not decay or rust as aluminum and timber.

It is essential to clean and oil upvc window repair near me windows and doors on a regular basis. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, which can make it very hazardous and possibly fatal. You should take the time to make sure that your windows are in good shape.

For single pane windows, it is fairly easy to replace windows, and the new one is usually able to fit into the frame that was previously installed easily. However, if windows with double panes are held in place by internal beading, it will be more difficult to get rid of the old panes and put in new ones. In this situation you'll need find some plastic spacers to assist the new pane to fit properly into the frame of the window.

Wearing protective eyewear and thick gloves is essential for anyone who plans to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not onto the floor which could cause them to be trampled.

It's a great idea seal the gap after the glass is removed. This will prevent drafts and water from entering your property until a professional comes out to repair the window. This also serves as an obstacle to stop intruders from getting into your home. If the gap is large, you might want to consider using a security door that has an integrated window, since it offers the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows with sash. In time, they could be affected by a variety of issues that include sliding. A sagging uPVC window can cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from getting worse.

Repositioning the hinges could help fix a window that is sliding. You'll first need to open the windows to access the frame. You can then unscrew both the top and bottom hinges using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you have repositioned your hinges. If you're happy with the fit, you can tighten the screws until they remain in the right place.

If you are unable to reposition the hinges you may require replacing the seal. As time passes, rubber seals lose their elasticity and become dry and cause them to lose tightness. It is crucial to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

UPVC handles can also loosen. The majority of the time it is due to screws that have become loose over time. However, it can also happen because the handle mechanism has been worn out. Luckily, it's not difficult to repair a loose uPVC window handle yourself. The first step is to close your window and do a test to ensure that it fits. The joints at the corners of the sash should be aligned with the joint on the casing. If it doesn't then you can make use of a screwdriver to loosen the handle and then return the mechanism to its original its original position.

3. Water Leaks

It is crucial to take action if you get up each morning to find mouldy walls and wet floors. Water leaks from windows are not just a cause for degradation of your home's structure but also undermine your efforts to regulate the temperature within your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be done by any DIYer who is competent. Depending on how serious the issue is, the old caulking might need to be removed. It is important to remember that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area harder to clean and reduce your energy efficiency.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious situations, you may need to think about replacing the window.

Moldy sills and rotten ones are also signs of water leakage. This is a fungus that thrives in damp conditions and can quickly spread across the home.

It is also important to remember that if the leakage originates from the glass in your double glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sliding. Again this can easily be repaired by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and blow open with ease, it may be hinges at the fault. They can be replaced by any competent DIYer and can be completed in just a few minutes.

Most households in the UK will have either top hung or side hung uPVC windows that have hinges and, just like any mechanical component they are susceptible to wear and tear over time. It is an easy procedure, but it is easier if you have someone to help you hold the frame in place.

Check that the uPVC hinges are closed and open in the proper direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The issue could be caused due to opening the window in the wrong way or due to a poor installation at the factory. This issue can be fixed by sending us a photo through our website and we will be pleased to offer you advice.

It is also essential to grease the hinges regularly. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also decreases the risk of a window sticking and prevent corrosion. Ideally, you should perform this every year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different factors. The hinges, also due to wear and tear can become misaligned, this causes a gap to form between the sash and the frame. They can be fixed by giving them a good clean, but in the event that they are beyond repair it could be necessary to have them realigned or replaced. The second is the interlock, which is on the hinge side of the window, may be misaligned. Again, it may be possible to give them a thorough clean, however in certain cases, it may be necessary to get them replaced.

These seals can wear down or be damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, which will help regulate indoor temperatures and again will lessen draughts.

Another method of reducing draughts effectively is by using a Draught-exclusion device. These are usually made of fabric tubes filled with a filler which can be hung over your window sill. These will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repair your windows made of upvc will provide a great level of security and insulation for your home. It is essential to remember that all windows will eventually wear out and it is more cost-effective to replace them instead of fixing them. If you have any problems with your upvc window, it's best to consult a professional immediately.